销售档案

​​Features:

• Siemens Touch Screen PLC;
• Grinding wheel motor 15 kW (20 HP), 400-3-50 Hz;
• Grinding wheel Ø250mm (segment grinding wheeel);
• Reversal of grinding wheel rotation;
• Electro-permanent magnetic table 2100x150mm;
• Angular divisor for magnetic table rotation ±90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Motorized automatic grinding wheel descent controlled by Siemens PLC (0.001-0.1 mm);
• Automatic work cycle (roughing, finishing, spark-out);
• Variable carriage speed from 1 to 30 m/min;
• Automatic lubrication of PTFE sliding blocks;
• Coolant through the centre of the grinding wheel + 2 nozzles either side;
• External tank with pump;
• Magnetic cleaner;
• Motorized rapid grinding wheel change;
• Variable grinding wheel speed.
• Automatic approach to work-piece (HSS)
• LED lamp

​Features:

​

​

​​Features:

• CNC grinding machine for metalcutting circular saw blades
• HSS circular saw blade diameter: 150 - 650 mm
• Friction circular saw blade diameter: 150 - 710 mm
• Teeth number: 10 - 998
• Maximum saw blade thickness: 6 mm
• Grinding wheel diameter: 150 mm
• Working speed: 2 - 60 teeth/min
• Coolant system motor pump: 50 litres/min - 7.5 bar
• Grinding wheel motor power: 2.2 kW

​

​

Features:

• For circular knives up to dia. 550 mm

• Machine control via PLC

• Control panel equipped with panel PC and 10-inch (16:9) touch screen

display

• Cabin for protection of the machining area

• Grinding head adjustable for bevel angle from +70° to -10°

• Circular knife spindle rotation via gear motor with digitally controlled,

programmed speed

• Interchangeable knife spindle

• Lubrication system with 60-litre capacity tank

• Central lubrication with automatic pump

• LED tube lamp for illumination of working area, protection degree

IP 67

​

​

​Features:

• 5.5 kW (7.5 HP) grinding motor;
• Segment grinding wheel Ø178 mm;
• Electro-magnetic chuck 1500x120mm with lever for rotation from 0° to 90°;
• Variable carriage speed 1-20 m/min;
• Switches for carriage stroke reduction;
• PLC (digital programmer);
• Automatic work cycle with adjustment of the partial downfeed and automatic stop at a pre-set quota;
• Spark-out at the end of the working cycle with automatic stopping of the carriage at the right side of the machine base;
• Reverse direction of rotation of the grinding wheel;
• Magnetic cleaner with rotating discs.

​

​

• ​6-month warranty on mechanical parts;
• Year of production 2002;
• Grinding wheel motor 5.5 kW (7,5 HP) 400 Volt, three-phase, 50 Hz;
• Automatic motorised grinding wheel descent and work cycle;
• Grinding wheel Ø178mm (segment wheel);
• Magnetic plane 1000x120 mm with lever for rotating the magnetic plane from 0° to 90°;
• Variable carriage speed 1-20 m / min;
• External tank with pump.

​- Automatic machine for removing burr from industrial blades and knives up to 3000mm in length;

- Orbital deburring machines supplied with abrasive cloth paper, 1000 grit;

- No.3 perfectly linear blade rests, with relative clamping, which have the ability to be moved along the linear guide;

- Blade presence sensor for carriage reversal;

- Linear guide with limit switch micro.